Your cart is currently empty.
Return to shop
This week’s sponsor of the week is Factory Chassis Parts (FCP Racing)
FCP racing is a Leader in High Performance Titanium Engine Mount Kits which are Designed and engineered to drastically improve traction, handling, cornering, and feel on Motocross, Supercross and Off-road Dirt Bikes.
Each piece is made from the Highest quality Billet Titanium and Billet Aircraft Aluminum to provide their customers with the Best Products money can buy.
They have found with extensive research and development that their superior engine mount design, shapes, angles and combination of different materials will give you an advantage no one else can provide.
Their CNC Machined Billet Titanium Front Engine Mounts have weight advantages, flex characteristics and heat disbursement qualities that outshine anything else available and Combined with their CNC Machined Billet Aircraft Aluminum Top Mount Design / Head Stay you’ll be feeling the difference.
We rely in Factory Chassis Parts on our race team bikes. Photo: Kardy Photos
FCP Racing engine mount kit provides you with more total bike comfort whether your braking or accelerating which for our riders equals more confidence so they can charge the whole track like never before.
So, no matter what brand of bike you have FCP Racing will have you covered.
See full article: http://teamrmatvmc.com/factory-chassis-parts-sponsor-of-the-week/?fbclid=IwAR37rd1MEv-EOh4ok49368zVk0GYVHm1aDuDDIt5FtVAO5hf0iV5X248eHg
You will need the stock bolts from your stock engine mounts, a 12mm and 14mm T-handle or socket with a rachet, a mallet or hammer to push the bolt through the front of the engine. The removal process is fairly straight forward, just loosen the bolts and remove the stock top and front engine mounts. There’s eight total 12mm bolts to the frame and four 14mm bolts to the engine itself. Once you’ve removed those you can now replace them directly with the FCP Racing mounts. Simply repeat the process to put the bolts back where they came from and tighten them to the recommended torque specs in your owner’s manual. You might not believe this is important but it does make a difference in the handling with different torque specs.
You might have noticed that although your 2019 YZ450F has improved front end traction over the previous years it still isn’t quite enough. The FCP Racing Kit improves front end traction and makes the front and rear work together and follow one another. This eliminates any wallow you may feel under high speed sections and square edge bumps that put a lot of stress on the chassis. The titanium front mounts stiffened up the chassis for added precise feeling and tracking into rutted corners. Which gave us overall more confidence putting the front wheel where we wanted instead of where we needed to at times because the rear wouldn’t follow the front before. They also helped with leaning the bike over and standing the bike back up on the exit of turns. A surprise we came across was the titanium front mounts helped with softening the harsh hits when going over square edge bumps. Even though they are “stiffer” in rigidity it delivers a plusher feel overall in those situations. We found the bike shined the most in deep rutted tracks over hardpacked ones but still an improvement overall
(3) Cool Factor. FCP Racing did a good job choosing the colors for the kit. The finish gives them that “factory” look that everyone drools over in the pits. Allows your bike to really standout and easy to spot.
See full article: https://motocrossactionmag.com/motocross-action-mid-week-report-53/